- Quick and easy to use
- Fast drying
- Fights rust
Plastikote Primers offer ultimate metal
protection with a non-sanding formula for areas of moderate corrosion. For
protection from severe corrosion use Plasti-kote Zinc Primer which actually
fuses to the surface it is applied to.
DRYING TIME:
Allow to dry for 10 minutes between coats. Touch-dry in 20 - 40 minutes.
Thoroughly dry in 2 - 4 hours.
COVERAGE:
Approximately 2.23m²
APPLICATION TIPS:
Use only in well ventilated areas.
Ensure surface is clean and dry.
Three thin coats are recommended rather than one heavy coat.
Before applying spray on an inconspicuous area to ensure compatibility and
suitability.
Special precautions should be taken during preparation of pre-1960 paint
surfaces as they may contain harmful lead. For further advice please telephone
Plasti-kote on 01223 836400
begin_of_the_skype_highlighting 01223
836400
begin_of_the_skype_highlighting 01223
836400
Download a Safety Data Sheet or a
Safety Label:
 |
